OM-AIR-18-013-214壓力調節器 美國omega
壓力調節器，適用于惰性氣體 - 高壓和低壓系統中的主壓和次壓調節
R44 系列壓力調節器
1年保修 新產品!
壓力調節器，適用于惰性氣體 - 高壓和低壓系統中的主壓和次壓調節
R44 Series Pressure Regulators:壓力調節器，適用于惰性氣體 - 高壓和低壓系統中的主壓和次壓調節
R44-221-RNEA
緊湊的設計
對于初級/次級調節高/低壓力模型
快速和容易的調整塑料鎖鈕
輸入壓力為207巴（3000 psig。）
調節從0.1到輸出壓力為12巴（1到175 psig）
標準模型可以緩解出口壓力降低時，系統是結束
面板或支架
UL認證
The R44 Series are UL listed (file number SA1089) industrial pressure regulators for use with compressed air and inert gases such as carbon dioxide, argon helium, krypton, neon nitrogen and xenon. The R83 models are for primary high pressure regulation, while the R44 models are for secondary low pressure regulation. These regulators are intended for industrial use and are not to be used for beverage dispensing applications.
規格：
R44 Models with ? ports, reducer bushings available for 1/8" ports
Operating Temperature: -34 to 66°C (-30 to 150°F)
Maximum Inlet Pressure: 17 bar (250 psig)
Pressure Drop: 15 psi at 150 psi inlet and 90 psi output
Flow: 4.7dm3/s (10 scfm)
Materials R44:
R44-221: Brass body; acetal plastic bonnet
R44-233: Brass body, brass bonnet
Valve: Brass/nitrile
Seat: Acetal
Elastomers: Nitrile
R83 Models with ? ports, reducer bushings available for 1/8" ports
Operating Temperature: -34 to 60°C (-30 to 140°F)
Maximum Inlet Pressure: 207 bar (3000 psig)
Pressure Drop: 0.35 bar (5 psig) at 69 bar (1000 psig) inlet and 4 bar(60 psig) output
Flow: 5.2dm3/s (11 scfm)
Materials R88: Brass body, zinc bonnet
Cartridge Valve: PTFE, brass, stainless steel
Diaphram: Acetal/nitrile
Seals: Nitrile
產品型號 產品描述
Low Pressure / Secondary Regulators with 1/8" Gauge Port
R44-221-RNAA Low pressure regulator with plastic locking knob, 0.1 to 0.7 bar (1 to 10 psig)
R44-221-RNEA Low pressure regulator with plastic locking knob, 0.3 to 3.5 bar (5 to 50 psig)
R44-221-RNKA Low pressure regulator with plastic locking knob, 0.3 to 7 bar (5 to 100 psig)
R44-233-RNAA Low pressure regulator brass adjusting screw, 0.1 to 0.7 bar (1 to 10 psig)
R44-233-RNEA Low pressure regulator brass adjusting screw, 0.3 to 3.5 bar (5 to 50 psig)
R44-233-RNKA Low pressure regulator brass adjusting screw, 0.3 to 7 bar (5 to 100 psig)
Gauges for R44 Regulators
OM-AIR-18-013-214 40 mm (1.5in) pressure gauge with 1/8 NPT, 0 to 2 bar (0 to 30 psig)
OM-AIR-18-013-211 40 mm (1.5in) pressure gauge with 1/8 NPT, 0 to 4 bar (0 to 60 psig)
OM-AIR-18-013-212 40 mm (1.5in) pressure gauge with 1/8 NPT, 0 to 7 bar (0 to 100 psig)
High Pressure / Primary Regulators with 1/4" Gauge Port
R83-200-RNEA High pressure regulator, 0.1 to 3.5 bar (2 to 50 psig)
R83-200-RNLA High pressure regulator, 0.3 to 8.5 bar (5 to 125 psig)
R83-200-RNNA High pressure regulator, 0.7 to 12 bar (10 to 175 psig)
Gauges for R83 Regulators
OM-AIR-18-013-208 50 mm (2in) pressure gauge with 1/4 NPT, 0 to 4 bar (0 to 60 psig)
OM-AIR-18-013-209 50 mm (2in) pressure gauge with 1/4 NPT, 0 to 11 bar (0 to 160 psig)
Accessories
OM-AIR-18-025-003 Wall bracket with panel nut for R44 low pressure regulators
OM-AIR-2962-04 Panel nut for R44 low regulators
OM-AIR-5095-51 Neck bracket for R83 high pressure regulators
AU-B79870143 Hex male nipple, 1/4 NPT
AU-B79870309 Reducing Bushing ? NPT OD- 1/8 NPT ID, 2 pcs.
OM-AIR-18-013-214壓力調節器 美國omega
